Build Volume: 260mm × 260mm × 300mm (height)
Try not to exceed 90% of the build plate size.
Print Resolution:
Nozzle: 0.4mm diameter
XY Placement Accuracy: 0.1mm
Min. Z Layer Height: 0.05mm
Absolute Maximum Temperature:
Extruder: 300°C
Build Plate: 110°C
Under normal circumstances, you should never reach these temperatures!
Filament:
You are only allowed to use 3mm PLA filament provided by the Fab Lab.
Other Information:
Compatible Slicers: MankatiUM(Recommended), Cura (requires expert settings)
Manufacturer Website